China Parking Systems

Model: DTP       Back to Products    
Tilting Parking Lift

Characteristics

1. This mini type tilting parking lift is suitable for limited height area; especially in basement or corners of an apartment.

2. The structure of this type adopts a tilting design of the upper car to make full use of the space;

3. Hydraulic drive with lowest noise and steady operation;

4. Anti-fall device for safety guarantee.

5. Safe and convenient design without construction foundation requirements.

Advantages

1. First safety control with protective devices

    1) Anti-dropping device: to prevent the vehicle loading pallet from undesired disconnection.

    2) Limited switch device to protect the equipment running.

    3) Photoelectric switch (device for checking the entrance of people and vehicles) to prevent the people from accidentally entering into the equipment under operation.

    4) Emergency switch: the emergency switch button is used to cut power off when there is anything abnormal during the equipment process.

2. Oil cylinder

Used cylinder reversal, have many advantages, not distortion, dustproof. Adopt Italy Aston Seal ring.

3. Adjusting lifting height, the maximum lifting height can be 1800mm for 2000KG car.

4. Lifting capacity can be 2000kgs;

5. Hydraulic drive, chain balancing device to ensure the balance both ends of rise and fall;

6. Low noise, smooth operation, save energy, low carbon and environmental protection;

7. Vehicle loading pallet fully enclosed design, to avoid oil leakage, rain and snow polluting the lower vehicles;

8. Structure all adopts layer cutting, attractive appearance, easy installation, less malfunctions, easy maintenance.

9. Plastic spraying high quality coating, high anti-corrosion ability, long life. Electrical and driving parts with waterproof characteristics;

10. Simple structure, easy installation, minimal requirements for civil engineering;

11. Certifications: CE



 

Technical Parameters

Item Parameters

Name

Tilting parking lift

Model

DTP

Car size

5000mmX1850mmX1550mm

Car weight

2000Kg

Parking cars

2

Mode of drive

hydraulic

Parking way

Ground car: Forward into

Pallet car: Reverse into

Electricity

220V 50HZ 1 phase;

380V 50HZ 3 phases 5 wires

Voltage of control

AC24V

Lift time

24S

Falling time

24S

Outer size

3950*2660*2156 (mm)

Pallet inside width

3541*2100 (mm)

Mode of Lift

Intellectual cylinders

Motor power

2.2KW

A-Length (with load)

6000mm

B-Height (with load Audi A6)

2900mm

C-Lifting height

1600~1850mm

D-Width of Platform

2100mm

E-Width of equipment

2800mm

F-Width between set bolts

2150mm

G-Length of basement

2580mm

H-Length (without load)

3895mm

Electricity

50HZ, 220V, 1P/380V, 3P;